V košarico

Seznam želja

Primerjaj

Pregled
Mnenja in ocene (3)

1. Premium tih ventilator, 40x40x10 mm, 12V, 3-pin Molex, 4500/3700 vrt. / MIN, maks. Za 17,9 dB(A), >150,000 h MTTF 2. Nagrajene 40x10mm A-serije fan z Pretok Pospešek Kanalov in Naprednih zvočnih Optimizacija okvirja za vrhunsko tiho učinkovitost hlajenja 3. Idealna zamenjava za hrupno ali zdrobljen 12V 4 cm ventilatorji v 3D tiskalniki, Dvr, NAS, stikala, usmerjevalniki, druga omrežja in naprav za shranjevanje, itd. 4. 3-pin 12V FLX različico je mogoče zagnati 4500 ali 3700 vrt. / min pomočjo priložene Low-Noise Adapterji, da dorečejo ventilator za največji pretok zraka ali skoraj neslišno delovanje

Package Seznam:

anti-vibration nosilcev, fan vijaki, Low-Noise Adapter podaljšek in OmniJoin adapter set za priklop ventilatorja za lastniške fan glave (kot na sliki)

Postavka Vrsta: Fan
Vrt / MIN:
Akustičnega Hrupa: 17,9 dB(A)
Uporabite za: 3D Tiskalnik(Za primer, Titan iztiskanje,CR10,Edaja 3,Prusa i3 mk3s)
Velikost: 40x40x10 mm
Akustičnega Hrupa z L. N. A.: 12,9 dB(A)
Številka Modela: NF-A4x10-FLX
Blagovna Znamka: Mellow
Priključek: 3-pin
Napetost: 5 V/12 V
RPM z L. N. A.: 3700

Oznake: edaja 3 silent fan, 3 edaja, baker heatsink, blurolls prusa mk3, genij topništvo, ender3 v2, edaja 5 plus nadgradnja, hladilnik noctua, edaja 3 pro nadgradnja, Noctua.

Sinacharybdis 2020-09-10 5/5	All right the product is 100% original
Brunoschmidt 2020-12-14 5/5	Delivery to the Moscow region for a week and a half. The box, apparently, casually opened, crumpled. The price, as for me, is overstated, you can find cheaper and out of sale. After the replacement of the printer "Ander 3 Pro" became really quieter, now the sounds of the fans of the mat are heard. Boards and sometimes BP, which can be lubricated with silicone grease, the sound will become quieter. The set is very rich, for different occasions, you will not have to buy anything. Presser connectors with some insulating liquid-lubrication inside. Noise decreased, approximately 20 dB, but increased cooling time from 6 minutes to 8 by 240 degrees to 35, also, the radiator is slightly warm, it used to be cold. At temperatures for PLA-it's OK. Also need a board-converter from 24 V to 12 V. If you need to make a printer quieter-buying yourself fully justifies, although you have to make some concessions. The goods are satisfied. I did not communicate with the seller.
Pelletierfrank 2020-09-16 5/5	After some small problems the seller has behaved very well and resolved them quickly. I totally recommend, very good shopping.